Description
New Terex|Simplicity 6' x 20' Three Deck Triple Shaft Screen On Oquamax Portable Screen Trailer
This is a portable screening plant with a top deck overs chute out front and a rear thrus discharge conveyor. Top overs go out the front of the plant via chutework. Twin cross belts handle the mid and bottom deck over products out the side of the plant. Segmented flop gates allow “some” cross overs blending, and “some” blending down to mix with screen thrus. Chute work is a roll away style allowing access to the discharge end of the screen for easy screen media replacement.
Oquamax portable screen trailer...
• Dual axle suspension.
• Eight wheels, 11.00 x 22.5 tires.
• Air brakes, travel lights, and mud flaps.
• Four hydraulic run-on pin type legs with valving and 12VDC power unit.
• Under screen hopper with adjustable skirting.
• Folding catwalks along both sides of screen and chutes with rear connection access around back with one ground access ladder.
Simplicity 6’x20’ Three Deck Triple Shaft Flat Screen…
• ElJay® oval stroke with adjustable angle, stroke and speed
• 25% thicker 5/16"" (8 mm) grade 50 high strength steel side plates
• Heavy-duty fully braced single crown steel deck construction
• Spring mounts adjust for 0°, 2.5°, 5°, 7.5° or 10° slope installations
• Exclusive patented and patent-pending features for durability and easy maintenance:
• Low maintenance vibration damper system
• Replaceable screen panel seals (620 models)
• “Flow-through” bearing lubrication
• Baffle splash lubrication system
• Double O-ring sealed for life vibrator construction
• Spherical washer design eliminates sidewall welds
• Huck-bolted screen box construction (no welds)
• Extended life coil spring suspension
• Replaceable bolt-on spring guides
• Gland type non-wearing shaft seal
• Bottom deck feed curtain
• 4' (1219 mm) clamp bars with spherical washer tensioning system
• Enclosed right-hand drive guard, motor mount, and tensioner
• Adjustable speed motor drive sheave and spring loaded belt tension idler
• Self aligning two row spherical roller bearings
• Hand access holes with removable covers
• Shaft tube liners
• Single V-belt with motor mount and drive guard
• 40 hp 1200 rpm std. duty screen motor.
Two - 30” cross conveyors for deck overs …
• 240 fpm.
• Full length sideboards with adjustable skirting.
• Open ends for reversing capability.
• ~5.5hp drives (right angle gearbox or motorized head pulley with rubber lagging.
• Drum type tail pulleys.
• Two ply 220# belting with 3/16” x 1/16” covers.
• Close spaced flat belt support idlers.
• Excludes scrapers due to reversibility.
Screen overs chute …
• Top deck overs out front centered discharge chute or via flop gates to mid deck overs chute below.
• Mid deck overs to cross belt #1, #2, or down to under screen conveyor via cross flop gates.
• Bottom deck overs to cross belt #2 or down to under screen conveyor via cross flop gates.
• AR chute liners.
Switch gear for all on plant motors and (4) spare 20hp starters
EXCLUDES:
Freight, Screen Media or its installation, switch gear or wiring, special paint (color or type), taxes, fees or permits.Spécifications
Année2026
fabricant SIMPLICITY
Modèle6X20
EtatNeuf
Numéro de Stock250113 SP33
Année2026|
fabricant SIMPLICITY|
Modèle6X20|
EtatNeuf|
Numéro de Stock250113 SP33|
