2024 DEISTER 6X20

2024

DEISTER

156

6X20

2006855

Occasion

NC001039

2024 Deister 6x20 Three Deck on Masaba Chassis ONE - TYPE TFM3P-3620, triple deck, 6' x 20' Deister Triple-shafted Horizontal Vibrating Screen Screen Vibrating Frame • Trunnion type spring support mounts on each corner, baked epoxy coated support springs. • Snubbers (friction checks) - spring loaded. • 1/4" thick HSLA steel sideplates formed along the top and bottom, with 5/16" thick formed HSLA steel reinforcing plates bolted to sideplates between bearing housing and sideplates. • Access ports with cover plates in the sideplates. • Removable back plates, rubber flap and steel combination. • Screen media support panel configuration. o Top deck – Screen cloth support panels constructed of fabricated I-beams welded to formed angles bolted to the sideplates. o Middle deck - Screen cloth support panels constructed of fabricated I-beams welded to formed angles bolted to the sideplates. o Bottom deck - Screen cloth support panels constructed of fabricated I-beams welded to formed angles bolted to the sideplates. • 4" long discharge lips protected by 1/4" thick AR steel replaceable wear plates. • Tension plates (skirtboards). • Deister heavy duty tension screen cloth tensioning devices. • Feed box with 1/4" AR steel replaceable wear plate in the bottom. Eccentric Mechanism • The triple-shafted “gear-type” vibrating mechanism is located between the middle and bottom decks and equipped with 120 mm. spherical roller vibrating screen bearings. • Steel-flanged vibrating mechanism tubes bolted to the sideplates. • Oil fill and drain plugs and the oil level gauges located on the outside surface of the vibrating mechanism end covers plate. • Deister “slingermist” oil bath lubrication system, with labyrinth type dust and oil seals requiring approximately 3-1/2 gallons of oil in the vibrating mechanism end covers acting as the oil reservoir and requiring only oil changes every 500 hours. • Each vibrating mechanism tube is protected by a 3/8" thick steel-backed rubber shield tack welded to the tube. • Eccentric shafts with adjustable weights for stroke adjustment. • Bronze sleeve between bearing and shaft. Drive System • Deister heavy duty rubber torsion pivoted motor base, less motor support. • Wideband V-belt, and motor sheave. • Belt guard, less mounting brackets. Screen Parameters • Screen is horizontal. • Approximate operating speed: 790 RPM. • Approximate stroke setting: 11/16". • Estimated weight (screen only): 18,600 lbs. Options Included • Rubber Flap Spring Protectors • Snubber Guards Chassis • Tandem Axle Chassis – Constructed of heavy-duty wide flange beam • Heavy-Duty 25,000lb Leaf Spring Suspension – With (8) 11R x 22.5 radial tires • Brake Package – Air brakes, emergency valve and plumbing • Light Package – Brake and directional signals • Mud Flaps • Screen Motor – Toshiba 50hp 1800rpm • Qty. (2) 24” Cross Conveyors – Reversible. with Dodge TAII #2, 7.5hp, PPI Pro Duty pulleys, PPI CEMA B idlers and 2-ply belt with mechanical splice • 48” Under Screen Conveyor – Rear discharge, with Dodge TAII #2, 10 hp, PPI Pro Duty pulleys, PPI CEMA B idlers, rubber disc returns, 2-ply 3/16” x 1/16” belting with mechanical splice & Flexco belt cleaner • Rollaway Screen Overs Chutes – Constructed of 3/8” AR steel, manually rollaway for maintenance • Under Screen Hopper – Constructed of 1/4" mild steel with adjustable rubber flashing • Catwalk & Ladder – Diamond plate flooring with handrail, knee rail, and kick plate on three sides of screen, with drive side extending past screen next to discharge chutes. (1) Aluminum access ladder. Self-closing safety gates at catwalk access points • Landing Jacks – Qty. (2) crank-down landing jacks • (4) Run-On Jack Mounting Plates – For future use • Cord Holder • (4) Lifting points – Located at all 4 corners of plant for cribbing purposes w/ loader bucket • Toolbox – Eliminates need for wooden crates • Guarding – Tail pulley guard, v-belt guard, and nip guard on head pulley. We do not guarantee that our guards meet all local codes. It is the owner’s responsibility to have them inspected locally. Guards are painted Safety Yellow (RAL 1012). • Steel Shot Blasted • Primer – (1) coat of 2-part urethane primer • Paint – (1) coat of 2-part urethane paint o Beige (RAL 1015) o Vinyl Stripe - Black • Owner’s Manual – (1) copy in English for maintenance and parts Options Included: • Add for Vulcanized Belt Splices – (2) 24” cross conveyors • Add for Vulcanized Belt Splices – 48” Under screen conveyor • Split Screen Guard • Catwalk Step Over at Screen Motor ¬– With maintenance access point, ladder • Manual Service Tie-Off Cable – Over top deck, lower for travel • Hydraulic Power Unit – With pump, reservoir, filter, valve body, and plumbing to operate all hydraulic accessories • Hydraulic Lift-Only Jacks – Qty. (4) lift-only jacks • Rubber Liners in Under Screen Hopper • Painted Single Stripe