2022 DEISTER 6X20

2022

DEISTER

1.500

6X20

2006059

Occasion

NC000876

2022 Deister 6x20 Triple Deck on RD Olsen Chassis Deister TFMP-3620 Screen Vibrating Frame • Trunnion type spring support mounts on each corner, baked epoxy coated support springs • Snubbers (friction checks) - spring loaded • 1/4" thick HSLA steel sideplates formed along the top and bottom, with 5/16" thick formed HSLA steel reinforcing plates bolted to sideplates between bearing housing and sideplates • Access ports with cover plates in the sideplates • Removable back plates, rubber flap and steel combination • Screen media support panel configuration o Top deck – Screen cloth support panels constructed of fabricated I-beams welded to formed angles bolted to the sideplates o Middle deck - Screen cloth support panels constructed of fabricated I-beams welded to formed angles bolted to the sideplates o Bottom deck - Screen cloth support panels constructed of fabricated I-beams welded to formed angles bolted to the sideplates • 4" long discharge lips protected by 1/4" thick AR steel replaceable wear plates • Tension plates (skirtboards) • Deister heavy duty tension screen cloth tensioning devices • Feed box with 1/4" AR steel replaceable wear plate in the bottom Eccentric Mechanism • The triple-shafted “gear-type” vibrating mechanism is located between the middle and bottom decks and equipped with 120 mm. spherical roller vibrating screen bearings • Steel-flanged vibrating mechanism tubes bolted to the sideplates • Oil fill and drain plugs and the oil level gauges located on the outside surface of the vibrating mechanism end covers plate • Deister “slingermist” oil bath lubrication system, with labyrinth type dust and oil seals requiring approximately 3-1/2 gallons of oil in the vibrating mechanism end covers acting as the oil reservoir and requiring only oil changes every 500 hours • Each vibrating mechanism tube is protected by a 3/8" thick steel-backed rubber shield tack welded to the tube • Eccentric shafts with adjustable weights for stroke adjustment • Bronze sleeve between bearing and shaft Drive System • Deister heavy duty rubber torsion pivoted motor base, less motor support • Wideband V-belt, and motor sheave • Belt guard, less mounting brackets Screen Parameters • Screen is horizontal • Approximate operating speed: 790 RPM • Approximate stroke setting: 11/16" • Estimated weight (screen only): 18,600 lbs. • H-beam base construction (if purchased): 10" x 54 lb. wide flange beam • Estimated weight (screen & H-beam base): 21,700 lbs. RD Olsen Chassis - Tandem Axle Chassis, 255/70R22.5 Tires, Air Brakes and LED Lights - 4 Hydraulic legs with Jet Screw Jacks and Small Gas engine Power Pack - 2 Swivel Jet Lack Front Legs 1/4" Thick hopper under screen with 1/4" thick AR liners - 50 Hp Screen motor - 60" Under screen fines conveyor 15hp drive (460v) w/ Dodge TXT425 Gear Reducer 12" Lagged Drum Pulley with 2 15/16" 1045 TGP Shaft 12" Wing Pulley with 2 15/16" 1045 TGP Shaft PPI Cema-C 5" 20° Troughing Rolls PPI Cema-C 5" Rubber Disc return rolls 3 Ply belting (Mechanical Splice) Dodge Bearings Arch Belt Scraper - Build extended discharge lips and mount to Screen 1/4" thick with 3/16" thick AR Liners - Collection hopper for middle and bottom deck - Tube Steel Stand at feed end to support feed conveyor - Tube Steel frame work and discharge end to support discharge conveyors - Aluminum Diamond plate tool box - Painted Metso Beige with Red Accents and black strip -Blending Chute